FlexStep Pro
Megaware FlexStep® Pro is an innovative multi-angle/extendable step system that attaches to your trailer frame, allowing easy access to virtually anywhere on your boat.
$159.95
The adjustable and removable Boat Trailer Step
Make Boating Easier and More Convenient
Easy Boat Entry and Exit
Easy Access to Windows and Storage
Easy Installation and Stowing
Megaware Engineering
The Megaware FlexStep Pro boat trailer step makes boating more convenient than ever. This innovative multi-angle and extendable step system can easily attach to your boat trailer frame increasing access points into your boat.
Many professional anglers use the FlexStep Pro to reach and access bait boxes, load and unload equipment and add additional entry points at the front of the boat.
The FlexStep has a quick, spring-loaded pull handle and locking pin system that adjusts the step to 16 different positions for maximum reach.
It is manufactured using the highest quality, lightweight, high tensile 6063-T6 anodized aluminum and safely holds up to 300 lbs.
Easily disconnect the adjustable step piece from the base mount by pulling the locking pin on the base allowing safe storage during travel.
FlexStep Pro Installation
The Megaware FlexStep Pro mounts to your trailer frame using just four bolts. It is compatible with most trailer frames (up to 5 1/8″ tall) and trailer tongues (up to 4″ wide). To install the Megaware FlexStep on larger trailer frames or tongues, you can purchase longer bolts on our website or your local hardware store.
Step 1) Choose Your Location
Place the base mount on the trailer frame in the location of your choice.
Step 2) Install the Base Mount and Backing Plate
Take the four bolts and place them through the mounting plate and align with the trailer frame. Protective sleeves are provided to sheath the bolts and prevent scratches where they could come in contact with the trailer frame.
Place the backing plate on the back or rear side of the trailer frame and align the four bolts through the corresponding holes. If you are mounting it to the trailer tongue, place it on the underside of the frame.
Place the backing plate on the back or rear side of the trailer frame and align the four bolts through the corresponding holes. If you are mounting it to the trailer tongue, place it on the underside of the frame.
Step 3) Step and Receiver
Insert the step into the step receiver, align the holes where desired, and insert the 2-inch locking pin.
Using the FlexStep Pro
The step receiver should arrive already attached to the base mount utilizing the 3-inch locking pin. To adjust the desired angle of the receiver, simply pull up on the spring-loaded plastic handle located on the outside of the receiver and rotate to one of the four notches in the base mount. Release the pull handle, and the spring-loaded receiver will lock in place.
For safety purposes, the FlexStep Pro must be removed when moving the trailer or loading the boat on or off the trailer. This can be done by removing the 3-inch locking pin located on the base mount and removing the step and receiver as one unit. Please read the warning label attached to these instructions and the product itself
Want the option of using your FlexStep Pro in multiple locations on your trailer? Pick up an additional base mount. This will allow you to use the T-step piece from your current FlexStep Pro system and attach it to other base locations on your boat trailer.
Features
- 16 Adjustable Positions
- Extends from 17 to 21 Inches
- Removable for Safe Travel and Stowing
- Fits Most Trailer Rails
DIY Easy Application
Megaware guarantees your Megaware FlexStep Pro for a period of three years from the date of purchase.
© Copyright 2023. All Rights Reserved.